109387, Москва, ул. Люблинская, 42, офис 108 +7(495) 351-88-01 351-88-02 main@tiscom.ru
 277625523 tiscomputers  @olegshishlyannikov
Техподдержка:+7(985) 991-63-14 support@tiscom.ru

HP ProLiant DL385 G7

  • До 2-х процессоров AMD® Opteron 61xx серии
  • Максимальный объем памяти 256GB
  • До 16 SAS/SATA 2.5" HDD
  • До 2-х блоков питания 1200W
Производитель: 
HP
Тип сервера: 
сервер 2U

ProLiant DL385 G7 – это передовой двухпроцессорный стоечный сервер высотой 2U с процессорами AMD®. Он разработан для задач виртуализации, однако благодаря высокой гибкости и возможностям расширения может использоваться в различных средах – от корпоративных центров обработки данных до развивающихся компаний малого и среднего бизнеса.

 

Удвоение производительности
• новейшие двенадцати- и восьмиядерные процессоры AMD Opteron серии 6100;
• Встроенные сетевые соединения позволяют высвободить слоты PCI и увеличить количество поддерживаемых виртуальных машин
• До 24 слотов DIMM с поддержкой до 256 ГБ памяти DDR3

 

Соответствие
• Благодаря наличию до шести слотов PCI вы можете выбрать одну из трех модульных конфигураций, включая слоты x16 высокой мощности, стандартные слоты PCI-X и (2) двухпортовые платы расширения x8
• 8 или 16 жестких дисков с малым форм-фактором SAS (емкость до 9,6 ТБ) или 12 жестких дисков с большим форм-фактором общей емкостью внутренних накопителей до 12 ТБ
• Возможность выбора блоков питания на 460, 750 или 1200 Вт переменного тока или -48 В постоянного тока, с КПД 92% или 94%
• Встроенные контроллеры SmartArray и кэш-память BBWC или FBWC выбранного объема

 

Виртуальная безупречность
• Надежные технологии памяти и сетевые контроллеры обеспечивают поддержку большего числа виртуальных машин и ресурсоемких бизнес-приложений
• Средства HP Insight Control обеспечивают управление физической и виртуальной ИТ-инфраструктурой с единой консоли
• Удобное и надежное развертывание виртуальных машин

 

Экономия питания
• Блоки питания с КПД 92% и 94% позволяют сократить энергозатраты
• HP Thermal Logic гарантирует надежное управление питанием
 

 
Processor
One of the following depending on Model		 Twelve-Core Processors
AMD Opteron™ 6180SE (2.5GHz/12-core/12MB/105W) Processor
AMD Opteron™ 6176SE (2.3GHz/12-core/12MB/105W) Processor
AMD Opteron™ 6176 (2.3GHz/12-core/12MB/80W) Processor
AMD Opteron™ 6174 (2.2GHz/12-core/12MB/80W) Processor
AMD Opteron™ 6172 (2.1GHz/12-core/12MB/80W) Processor
AMD Opteron™ 6166HE (1.8GHz/12-core/12MB/65W) Processor
Eight-Core Processors
AMD Opteron™ 6140 (2.6GHz/8-core/12MB/80W) Processor
AMD Opteron™ 6136 (2.4GHz/8-core/12MB/80W) Processor
AMD Opteron™ 6134 (2.3GHz/8-core/12MB/80W) Processor
AMD Opteron™ 6128 (2.0GHz/8-core/12MB/80W) Processor
AMD Opteron™ 6132HE (2.2GHz/8-core/12MB/65W) Processor
AMD Opteron™ 6128HE (2.0GHz/8-core/12MB/65W) Processor

NOTE: Processor wattage references reflect Average CPU Power (ACP). For more information on ACP visit: http://www.amd.com/powernow.
NOTE: Up to 2 processors supported. High Performance Model configurations include two processors, 16GB system memory, 1G storage controller memory, FBWC, DVDRW, ICE license, Redundant 750W Power Supplies, and 6 hot plug redundant fans.
Cache Memory 12MB (1 x 12MB) Level 3 cache memory
Chipset AMD SR5690 Northbridge and SP5100 Southbridge
Upgradeability Upgradeable to two processors
Memory Protection Advanced ECC
Online Spare
Memory
One of the following depending on Model		 Type

DDR3 Registered (RDIMM) and Unbuffered (UDIMM)
NOTE: If only one processor is installed, only half of the DIMM slots are available.
Standard
(Performance Models)		 16GB (8 x 2GB) PC3-10600R (DDR3-1333) Registered DIMMs
Standard
(Base Models)		 8GB (4 x 2GB) PC3-10600R (DDR3-1333) Registered DIMMs
Standard
(Entry Models)		 4GB (2 x 2GB) PC3-10600R (DDR3-1333) Registered DIMMs
Standard
(High Efficiency Models)		 4GB (2 x 2GB) PC3-10600R (DDR3-1333) Registered DIMMs
Maximum (RDIMM) 512GB
Maximum (UDIMM) 64GB
NOTE: If only one processor is installed, only half the DIMM slots are available
NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
Network Controller Two HP NC382i Dual Port Multifunction Gigabit Server Adapters (four ports total)
NOTE: 1GB of memory is sufficient to support up to eight Total Ports. 2GB of memory is required if nine or more Total Ports have been selected.
Expansion Slots
NOTE: Up to 6 PCI slots (PCIe slots are Gen 2). Standard BTO riser with PCIe (1) x8 FL/FH, (2) x4 HL/FH. Optional second risers with PCIe (1) x8, (2) x4; or a PCIe/PCI-X mixed riser with (2) PCI-X, (1) x8; or a x16 225w PCIe riser with (1) x16; or a (2) x8 Dual Port 10GbE riser.
Primary Riser
(Standard)		 Expansion Slots # Technology Bus
Width		 Connector Width Bus Number Form Factor Notes
1 PCI-e Gen2 x8 x16 6 Full Length/Full Height  
2 PCIe Gen2 x4 x8 12 Half length, full height  
3 PCIe Gen 2 x4 x8 15 Half length, full height  
NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number
NOTE: Bus width - Indicates the number of physical electrical lanes running to the connector
NOTE: Only single wide cards are supported
PCIe Riser
(Optional Secondary)		 Expansion Slots # Technology Bus
Width		 Connector Width Bus Number Form Factor Notes
4 PCIe Gen2 x8 x16 18 Full Length/Full Height  
5 PCIe Gen2 x4 x8 24 Low Profile  
6 PCIe Gen2 x4 x8 27 Low Profile  
NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number
NOTE: Bus width - Indicates the number of physical electrical lanes running to the connector
NOTE: Only single wide cards are supported
PCIe/PCI-X Riser (Optional Primary) Expansion Slots # Technology Bus
Width		 Connector Width Bus Number Form Factor Notes
1 PCI-X 64-bit N/A 7 Full length, Full height  
2 PCI-X 64-bit N/A 7 Half Length, Full Height  
3 PCIe Gen 2 x8 x8 11 Half Length, Full Height  
NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number
NOTE: Bus width - Indicates the number of physical electrical lanes running to the connector
NOTE: Only single wide cards are supported
NOTE: PCI-X support is limited to PCI-X cards only
PCIe/PCI-X
(Optional Secondary)		 Expansion Slots # Technology Bus
Width		 Connector Width Bus Number Form Factor Notes
4 PCI-X 64-bit N/A 19 Full Length/Full Height  
5 PCI-X 64-bit N/A 19 Low Profile  
6 PCIe Gen2 x8 x8 23 Low Profile  
NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number
NOTE: Bus width - Indicates the number of physical electrical lanes running to the connector
NOTE: Only single wide cards are supported
NOTE: PCI-X support is limited to PCI-X cards only
x16 PCIe Riser
(Optional Primary)		 Expansion Slots # Technology Bus
Width		 Connector Width Bus Number Form Factor Notes
1 PCIe Gen2 x16 x16 6 Full Length/Full Height Supports up to 225W
NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number
NOTE: Bus width - Indicates the number of physical electrical lanes running to the connector
NOTE: Only single wide cards are supported
x16 PCIe Riser
(Optional Secondary)		 Expansion Slots # Technology Bus
Width		 Connector Width Bus Number Form Factor Notes
1 PCIe Gen2 x16 x16 18 Full Length/Full Height Supports up to 225W
NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number
NOTE: Bus width - Indicates the number of physical electrical lanes running to the connector
NOTE: Only single wide cards are supported
(2) x8 PCI-E Riser
(Optional Primary)		 Expansion Slots # Technology Bus
Width		 Connector Width Bus Number Form Factor Notes
1 PCIe Gen2 x8 x16 6 Full Length/Full Height  
2 PCIe Gen2 x8 x16 9 Half length, full height  
NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number
NOTE: Bus width - Indicates the number of physical electrical lanes running to the connector
NOTE: Only single wide cards are supported
NOTE: The shared network port is only supported in the secondary riser connector
(2) x8 PCI-E Riser
(Optional Secondary)		 Expansion Slots # Technology Bus
Width		 Connector Width Bus Number Form Factor Notes
4 PCIe Gen2 x8 x16 18 Full Length/Full Height  
5 PCIe Gen2 x8 x16 21 Low Profile  
NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number
NOTE: Bus width - Indicates the number of physical electrical lanes running to the connector
NOTE: Only single wide cards are supported
NOTE: The shared network port is only supported in the secondary riser connector
Storage Controller
One of the following depending on Model		 Entry Models: HP Smart Array P410i/Zero Memory Controller
Base Models: HP Smart Array P410i/256 MB Controller
High Performance Models: HP Smart Array P410i/1G FBWC Controller
Available upgrades: 1G FBWC, 512MB FBWC, 256MB, 512MB with BBWC, Battery kit upgrade (for the 256MB cache), and Smart Array Advanced Pack (SAAP)
NOTE: RAID 6 and 60 requires purchase of HP Smart Array Advanced Pack (516471-B21).
Internal Storage Devices Diskette Drive
 		 None
Optical Drive
One of the following depending on Model
 None Standard
HP Slim SATA DVD RW Optical Drive (standard on Performance Models)
NOTE: The Optical Drive option is not available when you upgrade with the additional 8 SFF drive cage, or in the LFF Models.
Hard Drives
 		 None Standard
Hard Drive Bays

Standard (8) small form factor (SFF) hot-plug drive bays to support Serial-attached SCSI (SAS) and Serial ATA (SATA) drives
 

  • Optional second drive cage for additional (8) SFF drive bays (total 16)
     
  • Optional cage for (6) Large Form Factor SAS/SATA hard drive bays
Maximum Internal Storage Hot Plug SFF SAS 16TB 16 x 1TB (with optional SFF drive cage)
Hot Plug LFF SAS 18TB 6 x 3TB (with optional LFF drive cage)
Hot Plug SFF SAS SSD 12.8TB 16 x 800GB (with optional SFF drive cage)
Interfaces Serial 1
Video
 		 2 (1 front, 1 back)
Network RJ-45 (Ethernet)
 		 4
iLO3 remote management port 1
Keyboard 1
Pointing Device (Mouse)
 		 1
Graphics
 		 1
USB 2.0 Ports 6 (2 front, 2 back, 2 inside - one for internal tape)
NOTE: Please see the following URL for additional information regarding USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.
Industry Standard Compliance ACPI 2.0 Compliant
PCIe 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
Server Power Cords NOTE: If customers require a local power cord, they can check the power cord matrix for the appropriate county specific sku. Please see the following power cord matrix for details: http://www.hp.com/go/powercordmatrix
Common Slot ProLiant

HP has a new design for ProLiant power. The new Common Slot Power Supply bay. This design provides the customer with commonality in power supplies across multiple platforms to save on the cost of spares and allows HP to offer multiple power solutions to fit the customers' needs. Many HP ProLiant Servers come with Common Slot, High Efficiency power supplies that allow you to right-size power supplies for your server configuration. Common Slot (CS) designates commonality of the power supply across multiple ProLiant servers. HP's new Common Slot power supplies are designed for highest efficiency to provide power efficiency without degrading performance of the ProLiant. Power Supplies will have efficiency ratings up to 94%. There are three power wattage options to choose from - 460W, 750W, and 1200W - depending on the configuration of your server. To make sure you select the correct power supply to meet your configuration, we suggest that you use the HP Power Advisor (www.hp.com/go/hppoweradvisor) to decide the "Right-Size" for your configuration. All HP Common Slot power sources are UL, CE Mark Compliant, Hot Plug and Redundant.

It is highly recommended that you use the HP Power Calculator in defining the "Right-Size" power supply for your needs.
HP's ProLiant Common Slot Power supplies (460W & 750W) meet multiple Energy Efficiency Initiatives including Climate Savers Computing Initiative GOLD, ECOS Consulting 80PLUS GOLD, and plans on offering models that meet the Energy Star for Server requirements when they are published.

HP's ProLiant Common Slot Power supplies (1200W, 750W & 460W) meet multiple Energy Efficiency Initiatives including Climate Savers Computing Initiative Platinum and ECOS Consulting 80PLUS Platinum Power Supply requirements.

Redundant Power: Optional (1+ 1 or n+n redundant) power supplies can be purchased through power supply option kits (see Redundant Options for part numbers).

NOTE: Pre-Configured Performance models include two power supplies; Pre-Configured Base and Entry models include one power supply. On CTO models, power supply must be selected from available options.
System Fans Hot plug fans ship standard, N+1 fully redundant
(3+1) for 1 processor, (5+1) for 2 processors
NOTE: Processor option kits include 2 additional fans when upgrading to 2 processors.
Required Cabling For required cabling information, refer to the HP Web site at: www.hp.com/servers/dl385g-7.
Operating Systems and Virtualization Software Support for ProLiant Servers

Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Solaris
VMware
Citrix XenServer

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page www.hp.com/support/DL385G7.
Graphics

Integrated ATI ES1000

  • 16 bit color: maximum resolution of 1600 x 1200
  • 32 bit color: maximum resolution of 1280 x 1024

NOTE: Maximum resolution available via iLO3 remote console is 1280 x 1024 (for 32 bit color) and 1600 x 1200 (DVR max resolution).
Form Factor Rack (2U), (3.5-inch)
HP Insight management software HP Insight Foundation

Managing the growing number of servers can be complex and expensive for your organization. IT managers need to address changing business needs with tools that meet the challenges of managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a server's installation, configuration and maintenance throughout the entire server lifecycle. This provides the customer with higher levels of operational efficiency and highly reliable systems: http://www.hp.com/go/foundation.
The foundation pack includes:

  • HP SmartStart
  • HP Management DVD
  • HP ProLiant Smart Update Firmware DVD

SmartStart version supported (minimum): SmartStart 8.40.
http://www.hp.com/servers/smartstart

NOTE: In an effort to support reducing our environmental impact, the HP ProLiant Essentials Foundation Pack media will be available as a selectable option for this server at time of order of a CTO SKU. This will allow customers to order the number of media kits that best meet their needs and eliminate receiving unnecessary duplicate media.
HP Integrated Lights-Out (iLO) for ProLiant HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring, power and thermal control, and lights-out remote administration of ProLiant ML, DL, and BL servers. HP iLO functions without additional software and can be accessed from any location via a web browser. HP iLO works hand-in-hand with HP Systems Insight Manager, Insight Control, and Insight Dynamics for ProLiant, helping customers unleash the value of the ProLiant platform and deliver the highest possible quality of IT service. For more information, visit: www.hp.com/go/iLO
Intelligent Manageability HP Systems Insight Manager software
SmartStart
Management Agent
Redundant ROM
Remote Flash ROM
ROM-Based Setup Utility (RBSU)
Integrated Management Log
Automatic Server Recovery (ASR)
Dynamic Sector Repairing (with Smart Array controller)
Drive Parameter Tracking (with Smart Array controller)
Pre-Failure Warranty (covers processors, SAS hard drives and memory)
Security Power-on password
Keyboard password
QuickLock, Network Server Mode
Serial interface control
Administrator's password
Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response.

Введенная Вами информация будет передана нашему специалисту, отвечающему за данный вид продукции.
Вы получите квалифицированный ответ в ближайшее время.

отправляя заявку, я принимаю пользовательское соглашение