IBM System x3690 X5

• 16 on the system planar
• 32 total with optional memory mezzanine
• 64 total with optional MAX5 and memory mezzanine

IBM MAX5 for System x®, part number 59Y6265, is for x3690 X5 models with Intel Xeon 7500 and 6500 series processors (machine type 7148)
IBM MAX5 V2 for System x, part number 88Y6529, is for x3690 X5 models with Intel Xeon E7-2800 and E7-8800 series processors (machine type 7147)
 

• -256 GB without the memory mezzanine
• -512 GB total with the memory mezzanine populated
• -1024 GB total with the memory mezzanine and MAX5 populated

Memory protection technologies:

-ECC
-ChipKill
-Memory Mirroring
-Memory Sparing
-Redundant Bit Steering (MAX5 or servers with E7 processors only, x4 DIMMs only)

Up to 5 PCIe 2.0 slots depending on the riser cards used

-Slot 1, PCIe 2.0 x8 full height, half length slot
-Slot 2, PCIe 2.0 x8 full height, half length slot

-Slot 3, PCIe 2.0 x8 low profile adapter.
-Slot 4, PCIe 2.0 x4 low profile adapter (x8 mechanical).
-Slot 5, PCIe 2.0 x8 low profile adapter. The Emulex 10Gb Ethernet adapter is installed in this slot if the adapter is part of the server configuration.

Up to 16x 2.5-inch SAS hot-swap bays; or
Up to 24x 1.8-inch SSD hot-swap bays

Supported:

60Y0339 IBM 4x 2.5" HS SAS HDD Backplane (Supports up to eight 2.5-inch SAS or SATA hot-swap drives) ( pic. 10) 4 max
60Y0381 IBM 8x 2.5" HS SAS HDD Backplane (Supports up to eight 2.5-inch SAS or SATA hot-swap drives)   2 max
60Y0360 IBM eXFlash 8x 1.8" HS SAS SSD Backplane (Supports up to eight 1.8-inch hot-swap SSDs)     4 max

Optional

46M0901 IBM UltraSlim Enhanced SATA DVD-ROM
46M0902 UltraSlim Enhanced SATA Multi-Burner

1 / 4 - 675 W 220 V

60Y0332 IBM High Efficiency 675W Power Supply (Use for power supply 2 and for MAX5)
60Y0327 IBM 675W Redundant Power Supply Kit (Use for power supplies 3 and 4)

ServeRAID-BR10i SAS/SATA Controller:

-Two internal x4 SFF-8087 connectors
-Supports RAID levels 0, 1, and 1E
-3 Gbps throughput per port
-Based on the LSI 1068e controller
-PCI Express 2.0 x8 host interface
-Stripe size: 64 KB (fixed)

ServeRAID M1015 controller SAS/SATA Controller:

-Two Mini-SAS internal connectors
-Supports RAID levels 0, 1, and 10
-Supports RAID levels 5 and 50 with optional ServeRAID M1000 Series Advanced Feature Key
-6 Gbps throughput per port
-Based on the LSI SAS2008 6 Gbps RAID on Chip (ROC) controller
-PCI Express 2.0 x8 host interface
-Configurable stripe size up to 64 KB

ServeRAID M5014 SAS/SATA Controller :
-Two Mini-SAS internal connectors
-Supports RAID levels 0, 1, 5, 10, and 50
-Supports RAID 6 and 60 with the optional M5000 Advanced Feature Key
-Performance optimization for SSD drives with optional M5000 Series Performance Accelerator Key
-6 Gbps throughput per port
-PCI Express 2.0 x8 host interface
-Based on the LSI SAS2108 6 Gbps ROC controller
-256 MB of onboard cache
-Optional Intelligent Li-Ion-based battery backup unit with the ServeRAID M5000 Series Battery Kit

ServeRAID M5015 SAS/SATA Controller:
-Two Mini-SAS internal connectors
-Supports RAID levels 0, 1, 5, 10, and 50
-Supports RAID 6 and 60 with the optional M5000 Advanced Feature Key
-Performance optimization for SSD drives with optional M5000 Series Performance Accelerator Key
-6 Gbps throughput per port
-PCI Express 2.0 x8 host interface
-Based on the LSI SAS2108 6 Gbps ROC controller
-512 MB of onboard cache
-Standard Intelligent Li-Ion-based battery backup unit with up to 48 hours of data retention

ServeRAID B5015 SSD Controller:
-Two Mini-SAS internal connectors
-Supports RAID levels 1 and 5
-6 Gbps throughput per SAS port
-PCI Express 2.0 x8 host interface
-Based on PMC-Sierra PM8013 maxSAS 6 Gb/s SAS RoC controller
-Performance optimized for SSDs
-Stripe size of up to 1 MB

ServeRAID Expansion Adapter (SAS expander that allows you to create RAID arrays of up to 16 drives and across up to four backplanes. You can use only the 2.5-inch hot-swap drive backplanes with this adapter)

Alert on LAN 2, automatic server restart, IBM Director, IBM ServerGuide, IMM, light path diagnostics (independently powered), predictive failure analysis on hard disk drives, processors, VRMs, fans and memory, Wake on LAN, dynamic system analysis

Features:

-Intelligent Platform Management Interface (IPMI) Version 2.0
-Simple Network Management Protocol (SNMP) Version 3
-Common Information Model (CIM)
-Web browser

-Remotely viewing video with graphics resolutions up to 1600x1200 at 75 Hz, regardless of the system state
-Remotely accessing the server using the keyboard and mouse from a remote client
-Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO and diskette image files as virtual drives that are available for use by the server
Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive
Capture blue-screen errors
 

Maximum weight: 31.3 kg (69 lb) when fully configured

Electrical:
100 to 127 (nominal) V ac; 50 Hz or 60 Hz; System 20A (10A/PS)
200 to 208 (nominal) V ac; 50 Hz or 60 Hz; System 10A
200 to 240 (nominal) V ac; 50 Hz or 60 Hz; System 9A
Minimum configuration: 0.20 kVA (one power supply)
Minimum configuration: 0.26 kVA (two power supplies)
Typical configuration: 1.12 kVA (two power supplies)
Maximum configuration: 2.16 kVA (two power supplies)

BTU output:
Ship configuration (1 power supply): 648 BTU/hr (190 watts)
Ship configuration (2 power supplies): 802 BTU/hr (235 watts)
Typical configuration: 3,753 BTU/hr (1100 watts)
Full configuration (chassis/MAX5): 5115 BTU/hr (1498 watts)

Noise level: 6.3 bels